EasyManua.ls Logo

Panasonic KX-TCD450 Series - Page 74

Panasonic KX-TCD450 Series
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Address Default Name Country
Setting
Type Description
1EEA 05 MinDigitsToMatch x D Valid values: 01 - FF (-Must be lower than
MaxDigitsToMatch).
-If all digits of one of the numbers match completely,
-with at least this number of digits, we have a match.
(-Or if they match completely with less digits, we also have
match.)
1EEC 04 DisplayContrast 17 D Display contrast value[00..1F] with 00 as the highest
contrast setting
28.3.3. Battery Parameters
Address Default Name Type Description
1F02 A0 LowVoltage A Voltage on which to start battery low-indication.
The voltage has to be measured under this value for
8 seconds before the handset start signaling low battery.
LowVoltage[eeprom]=[ADC-steps]=LowVoltage[mV]
(14.35[mV/step])
28.3.4. Default Audio-Parameters
Address Default Name Country
Setting
Type Description
1F07 46 ReceiveGainLowOffset x D Bit7 - AOG
Bit6 - AOG2
Bit5 - bit0: Gain-receive for volumestep 1 offset to
volumestep 2 (GR-Index) (values ranging from 0x00 to
0x24, each step representing 1 dB)
1F08 46 ReceiveGainHighOffset x D Bit7 - AOG
Bit6 - AOG2
Bit5 - bit0: Gain-receive for volumestep 3 offset to
volumestep 2 (GR-Index) (values ranging from 0x00 to
0x24, each step representing 1 dB)
1F1C 16 GX-index 17 A Gain-transmit (values ranging from 0x00 to 0x24, each step
representing 1 dB). The index represent volumestep 2. See
table.
1F1D 59 GX-index x A Bit7 - AOG
Bit6 - AOG2
Gain-receive (values ranging from 0x00 to 0x24, each step
representing 1 dB). The index represent volumestep 2. See
table.
74
KX-TCD450RUM / KX-A145RUM / KX-TCD450RUT / KX-A145RUT

Table of Contents

Related product manuals