46
Handset Settings
Setting the Alarm “Off”
• The factory preset is “Off”.
• To delete the displayed memo alarm, press then select “Yes” on step 4.
To Stop the Alarm
• You can also stop the alarm by pressing , , to , , or .
• If “Once” is selected, the setting is turned off. When in talk or intercom mode, the
alarm will not sound until the call is ended.
Follow steps 1 to 4 on the previous page, then:
5
Select “Off”.
6
Select “Save”, then “Saved” is displayed.
(The Alarm sounds: Max. 3 minutes) Press .
515E_E.book Page 46 Friday, June 27, 2003 2:23 PM
To Next Page
Loading...
