73
Answering System
Answering System
Greeting Message
Recording Your Own Greeting Message
Selecting the Caller’s Recording Time
• The factory preset is “No Limit”.
1
Press JOYSTICK
(or move).
2
Select “ TAM
Operation”.
3
Select “Record”.
4
Select “Record
OGM”.
5
Record Greeting
Message.
8 inches (20 cm)
away from the Mic.
6
Press JOYSTICK to
finish recording.
Follow steps 1 to 2 shown above, then:
3
Select “Setting
TAM”.
4
Select “Msg Rec
Time”.
5
Select “1 Minute” or
“No Limit” (up to 30
minutes) or “Greeting
Only” (no incoming
message will be
recorded).
515E_E.book Page 73 Friday, June 27, 2003 2:23 PM
To Next Page
Loading...
