Panasonic KX-TCD515E - Page 48

48
Handset Settings
Setting the Ringer Volume
The choices are 6 levels and off. If you set the volume to OFF, “ ” is displayed,
however, still the volume of a paging and intercom call are level 1.
• The factory preset is 6.
Selecting the Ringer Pattern for External Call/Internal Call/Paging
• The factory preset is 1.
Selecting the Ringer Pattern for Private Ring
• The factory preset of each ringer pattern is 1.
1
Press JOYSTICK
(or move).
2
Select “ Setting
Handset”.
3
Select “Ringer
Option”.
4
Select “Ringer
Volume”
.
5
To increase volume, move
the JOYSTICK up.
To decrease volume,
move the JOYSTICK
down.
6
Press
JOYSTICK.
Follow steps 1 to 3 shown above, then:
4
Select “EXT Ringer Type”, “INT
Ringer Type” or “Paging Tone”.
5
Select the desired ringer pattern.
Follow steps 1 to 3 shown above, then:
4
Select “Private
Ring”.
5
Select the desired
category.
6
Select the desired
ringer pattern.
515E_E.book Page 48 Friday, June 27, 2003 2:23 PM