Items Adjustment
Point
Procedure
(P) Power RAMP
Confirmation
- Follow steps 1 to 6 of (J) above.
7.Confirm that “Power RAMP is Matching“.
(Q)
*
Audio Check
(Cordless
Handset)
-
1. Link with Cordless Handset.
2. Input -45dBm/1kHz to Headset MIC of Cordless Handset.
Measure the Level at Line I/F and distortion level.
3. Confirm that the level is -10dBm ± 5dB and confirm that the distortion level is < 5%
at TEL Line (600 Road).
4. Input -20dBm/1kHz to Line I/F.
Measure the level at Headset Receiver of Cordless Handset and distortion level
(*Receive volume set to middle).
5. Confirm that the level is -23dBm ± 5dB and confirm that the distortion level is < 5%
at Receiver (Volume Middle, 150 Road).
62
To Next Page
Loading...
