Country
Setting
Description
x Default - no specific country setting, so revert to default value.
27.3. EEPROM Layout
27.3.1. General Setup1
Address
Initial
Type
Name Description Default
0 - EEP_EepromType EEPROM type
0x00:32kbit type TCD500/510
0x55:64kbit type TCD530/540
0xAA:128kbit type TCD505/515/535/545
other:32kbit type
0x00
1 F EEP_ModelInfo Model information
Bit0:TAM 1:Enable 0:Disable
Bit1:Base Phonebook 1...1:Enable, 0:Disable
Bit2:Audible Call...1:Enable, 0:Disable
Bit3:SP-PHONE...1:Enable, 0:Disable
Bit4-7:Not used
TCD500/505: 0x00
TCD510/515: 0x07
TCD530/535: 0x0A
TCD540/545: 0x0F
0x00
24A 1
EEP_MenusEnabled
Menus Enabled
Bit0= Menu of Select Dial Mode 1:Enable 0:
Disable
Bit1=Flash Type1 Menu...1:Enable, 0:Disable
Bit2=Flash Type2 Menu...1:Enable, 0:Disable
Bit3=Flash Type3 Menu...1:Enable, 0:Disable
Bit4=Menu of Select Pause time...1:Enable, 0
:Disable
0x1E
27.3.2. General Setup2
91