4.4 Timer Programming
Automatic Redial Repeat Times
209
System Programming 4-65
Description Sets the number of times Automatic Redial is tried. Automatic
redialing of the last dialed or saved number is done up to the
specified number of times.
Selection Number of times: 1 through 30
Default 4 times
Programming 1. Enter 209.
Display: Redial Times
2. Press NEXT.
Display example: Attempt: 4
3. Enter the number of times.
To change the current entry, press CLEAR and the new number of
times.
4. Press STORE.
5. Press END.
Conditions • Program [210] “Automatic Redial Interval Time” is used to set the
interval time between Automatic Redial attempts.
• You cannot leave the entry empty.
Feature References Section 3, Features,
Redial, Automatic
To Next Page
Loading...
