1. Extension Connection for KX-TD816
Wire Specifications
In making an extension line connection, use twisted pair cable for
installation. The wire specifications for extensions are as follows:
Wire Solid wire
Diameter of conductor ø 0.4 – ø 0.65 mm
Diameter including coating ø 0.66 – ø 1.05 mm
Connection Insert the modular plugs of the telephone line cords (4-conductor
wiring) into the modular jacks on the system. Mis-connection may
cause the system to operate improperly. See Section 6.1.1
“Installation” and 6.1.2 “Connection” before connection.
2-14 Installation
2.3.3 Extension Connection
for Digital Proprietary Telephones, Single Line Telephones and DSS Console
(KX-TD816: Jack 1 through Jack 8, KX-TD1232: Jack 1 through Jack 16)
To Next Page
Loading...
