Installation 2-45
2.4.9 Doorphone and Door Opener
Connection
Connecting Door Openers
2. Loosen the screws.
1. Loosen the screw to remove the cover. 3. Insert the wires coming from the door openers
into holes and tighten the screws.
Notes • For wiring, it is recommended to use UL
1015, AWG 22 twisted wire or the
equivalent.
• The wire should be between 1.2 and 2.4 mm
(3/64 and 3/32 inch) in diameter including
the coating.
• Set the door opener paired with the
doorphone.
To door
opener 2
To door
opener 1
D=1.2-2.4 mm (3/64-3/32 inch)
To Next Page
Loading...
