Panasonic KX-TDA100 - Page 202

PS Registration
[690]
001 to 128
PS No.
1 to 4 digits
END
(HOLD)
ENTER ENTER
To the PS
operation
below
Extn. No.
When the PS has not been registered yet
When registering the
PS for the first time, it is possible to select the desired language for the display. (You do
not need to enter the PS system programming mode when registering for the first time.)
Using the KX-TD7684/KX-TD7694
Press
POWER for
2 seconds.
Select the desired
language .
Press "F"
for 2
seconds.
C.Tone C.Tone
Using the KX-TD7680
Press
POWER for
2 seconds.
Press S3
for 2
seconds.
C.Tone
Press S2 repeatedly
to select the desired
language.
[ F2 ]
[ F3 ]
Using the KX-TD7690
Press
POWER for
2 seconds.
Press S3
for 2
seconds.
C.Tone
Press S2 repeatedly
to select the desired
language.
F2
F3
When the PS has already been registered to another PBX
One PS can be registered to a maximum of 4 different PBXs.
Using the KX-TD7684/KX-TD7694
Choose
"Base 1–4".
Select
"
Register H/S ".
C.Tone
Using the KX-TD7680
Choose
"SYSTEM 1–4".
Select
"REGISTRATION".
C.Tone
Using the KX-TD7690
Choose
"SYSTEM 1–4".
Select
"REGISTRATION".
S1S1
SEL SEL
C.Tone
202 Installation Manual
2.9.7 Connecting a Cell Station to the PBX