Calculation Example (KX-TDA200)
Equipment Type Load Figure
KX-DT300/KX-T7600 series DPT 48 units 48
Other DPT 2 units 8
SLC16 1 card 16
MSLC16 1 card 16
VPS 8 ports 8
Total 96
The total load figure is 96. As this is between 64 and 128, you should install the PSU-M. But if you expect
expansion in the
future, it may be better to install the PSU-L. There is no harm in installing a PSU that is larger
than is required for the current configuration.
38 Installation Manual
1.4.3 System Capacity
To Next Page
Loading...
