Panasonic KX-TDA15 - Page 17

2.1 PT Programming
PT Programming Manual 17
Entering System Programming Mode
Using a PT to perform system programming allows an authorised extension user to set a wide range
of PBX features and parameters.
There are two levels of system programming that can be performed with a PT: administrator-level
programming and user-level programming.
Administrator Level:
Allows the programming of all settings accessible through PT programming.
User Level:
Allows the programming of limited settings as permitted through PC programming.
Note
means default value throughout this manual.
Programming Structure
SELECT
FLASH
CLEAR
SECRET
*
1
:
The buttons shown in this column are from the KX-T7600 series.
*
2
:
The buttons shown in this column are from the KX-T7400 series.
Programming
Number
Programming Group Title Description
[0XX] Basic Programming Frequently used programming steps
Fixed Buttons
Function
KX-T7600/IP-PT*
1
KX-T7200/KX-T7400/
KX-T7500*
2
AUTO ANS
M
U
TE
MESSAGE
MUTE
AUTO ANSWER MESSAGE
FLASH/
RECALL
FLASH
TRANSFER
TRANSFER
INTERCOM
INTERCOM
PROGRAM/
PAUSE
#
= 1234
System Password for Administrator
Programming No.
3 digits
—for PT Programming
= 1234
Programming No.
3 digits
System Password for User
—for PT Programming
PROGRAM/
PAUSE