Panasonic KX-TDA15

3.2 Feature Programming References
PT Programming Manual 55
Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected
Name Identification Presentation (CNIP/CONP)—by QSIG
• [003] Extension Number
• [004] Extension Name
Feature Guide Reference
1.26.4.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/
Connected Name Identification Presentation (CNIP/CONP)—by QSIG
Class of Service (COS)
• 2.1.8 COS Programming
• [602] Class of Service
Feature Guide Reference
2.2.1 Class of Service (COS)
D
Dial Type Selection
• [410] LCOT Dialling Mode
• [411] LCOT Pulse Rate
• [412] LCOT DTMF Minimum Duration
Feature Guide Reference
1.5.4.4 Dial Type Selection
Direct In Line (DIL)
• [421] BRI DIL/DDI/MSN Selection
• [450] DIL 1:1 Destination
Feature Guide Reference
1.1.1.2 Direct In Line (DIL)
Direct Inward Dialling (DID)/Direct Dialling In (DDI)
• [421] BRI DIL/DDI/MSN Selection
• [451] DID Number
• [452] DID Name
• [453] DID Destination
Feature Guide Reference
1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
Direct Inward System Access (DISA)
• [209] DISA Delayed Answer Time
• [210] DISA Trunk-to-Trunk Call Prolong Time
• [211] DISA Intercept Time
• [475] DISA Silence Detection
• [476] DISA Continuous Signal Detection
• [477] DISA Cyclic Signal Detection
• [604] Extension Intercept Destination