14
KX-TG1711MEB/KX-TG1712MEB/KX-TGA171MEB
8 Service Mode
8.1. Engineering Mode
8.1.1. Base Unit
Note:
(*1) Refer to For Service Hint (P.13).
1). Register a Handset to a Base Unit.
6). Repeat from Step 4).
5). Press "YY"(Data) ,
then press
{MENU/OK}
key.
D is new setting data
4). Press "XXXX"(Address) ,
then press
{MENU/OK}
key.
D is current setting data
H/S key operation H/S LCD
Ringer Setup
A:0000 D:00
A:XXXX D:XX
w
w
Important:
Make sure the address on LCD is correct when entering new data. Otherwise, you may ruin the unit.
3). Press "#004".
A is Address D is data
If press {OFF} (Off) twice anytime, return to standby mode.
1
1
1
1
1
w
w
A:XXXX D:YY
A:XXXX D:XX
w
2). Press
{MENU/OK}
key.
Dial keypad
{
MENU/OK
}
{
OFF
}
(off)
Navigator key
{^} {V} {
<
}{
>
}
ޣCLEARޤ(Clear)
To Next Page
Loading...
