Panasonic KX-TG2238S - Answering Calls

22
Answering Calls
When a call is received, the unit rings and “ Incoming call ” is displayed, and the
Ringer indicator on the handset and the IN USE/CHARGE indicator on the base
unit flash rapidly. If you subscribe to a Caller ID service, see page 23.
• When the ringer volume is set to OFF, the unit will not ring (p. 16).
1
Press [] or [] .
• You can also answer a call by pressing any
button except [] , [] and [OFF] .
2
To hang up, press [OFF] or place the
handset on the base unit.
Auto Talk: If you set the Auto Talk feature to ON
(p. 14), you can answer a call by
lifting the handset off the base unit.
1
Press [SP-PHONE] .
• The SP-PHONE indicator lights.
2
Talk into the MIC .
3
To hang up, press [SP-PHONE] .
• The indicator light goes out.
Handset
>
>
[]
[OFF]
[]
Ringer
Indicator
Base Unit
MIC
[SP-PHONE]
and Indicator
IN USE/
CHARGE
Indicator
✷✸✸✿✤✦✪✪✿✮❃ ✥✥  