NOTE:
Refer to Handset Reference Drawing for connection of DC power
source and voltmeter.
9.5. Base Unit Reference Drawing
9.6. Handset Reference Drawing
9.7. Frequency Table
10. DESCRIPTION
10.1. Frequency
The frequency range of 2.4015 GHz ~ 2.4705 GHz is used. Transmitting and receiving channel
between base unit and handset is same frequency. Refer to the Frequency Table.
10.2. Time Division Duplex (TDD) operation
Transmission/reception between the base unit and handset is performed by time-sharing as
shown in Fig. 7. 1 slot time of transmission and reception is 1mS.Same frequency is used in
transmitting and receiving. The figure shows an example; the frequency of 1ch is used in
transmitting between the base unit and handset.
Fig. 7
54
To Next Page
Loading...
