15.5. Reception Signal Circuit
The received signal from the base unit is output from pins 33 (SPN) and 32 (SPP) of IC201 (DSP)
as the voice signal. SPN is the inverse output of SPP, and the speaker is driven by SPN and SPP.
CN203 is the headphone jack. When the headphone is connected to this jack, the output to the
speaker of the handset (SPN,SPP) is cut and the voice signal is output to the headphone
(HSOUT) only.
16. CPU DATA (Base Unit)
16.1. IC501
74
To Next Page
Loading...
