Ref. No. Part No. Part Name & Description Remarks
A1 PQJA10075Z TEL CORD
A2 PQKE10127Z1 BELT CLIP (for KX-TG2583B) (for KX-TG2583S) S
A2 PQKE10127Z2 BELT CLIP (for KX-TG2583W) S
A3 PQKL10038Z3 WALL MOUNT ADAPTOR (for KX-TG2583B) (for KX-TG2583S) S
A3 PQKL10038Y1 WALL MOUNT ADAPTOR (for KX-TG2583W) S
A4 PQLV10Z AC ADAPTOR
A5 PQPD10440Y PAD
A6 PQQT22229Z TAM LABEL
A7 PQQW12360Z QUICK GUIDE (for English)
A8 PQQW12361Z QUICK GUIDE (for Spanish)
A9 PQZTTG2583B INSTRUCTION BOOK ASS’Y
A10 PQPD10469Z CUSHION CORRUGATED (for KX-TG2583S)
A11 PQXDDS400-8 SECURITY TAG (for KX-TG2583S)
A12 PQXDZLDRS1 SECURITY TAG (for KX-TG2583S)
P1 XZB21X35A03 PROTECTION COVER (for Base Unit)
P2 XZB10X35A02 PROTECTION COVER (for Handset)
P3 PQPK13353Z GIFT BOX (for KX-TG2583B)
P3 PQPK13344Z GIFT BOX (for KX-TG2583S)
P3 PQPK13387Z GIFT BOX (for KX-TG2583W)
24. FOR SCHEMATIC DIAGRAM
24.1. Base Unit (SCHEMATIC DIAGRAM (Base Unit))
Notes:
1. DC voltage measurements are taken with voltmeter from the
negative voltage line.
This schematic diagram may be modified at any time with the development of new technology.
24.2. Handset (SCHEMATIC DIAGRAM (Handset))
Notes:
1. DC voltage measurements are taken with an oscilloscope or a
tester with a ground.
2. The schematic diagrams and circuit board may be modified at any
time with the development of new technology.
25. CIRCUIT BOARD (RF Unit)
96
To Next Page
Loading...
