Sparkle Solder 115A-1, 115B-1 or Almit Solder KR-19, KR-19RMA
- Soldering iron
Recommended power consumption will be between 30 W to 40 W.
Temperature of Copper Rod 662 ± 50°F (350 ± 10°C)
(An expert may handle between 60 W to 80 W iron, but beginner
might damage foil by overheating.)
- Flux
HI115 Specific gravity 0.863
(Original flux will be replaced daily.)
19.2. Procedure
1. Temporary fix FLAT PACKAGE IC by soldering on two marked 2
pins.
*Most important matter is accurate setting of IC to the corresponding soldering foil.
2. Apply flux for all pins of FLAT PACKAGE IC.
3. Solder employing specified solder to direction of arrow, as sliding
the soldering iron.
79
To Next Page
Loading...
