Panasonic KX-TG2621C - Editing Caller Information

Call Display Service
29
Editing a caller’s phone number before
calling back
You can edit a phone number in the caller
list by adding the long distance code “1” or
removing its area code.
1 Press {^} or {V} to enter the caller list.
2 Select the desired item.
3 Press {Edit} repeatedly until the phone
number is shown in the desired format.
1 1 – Area code – Local phone
number
2 Local phone number
3 Area code – Local phone number
4 {C}
Note:
L The number edited in step 3 will not be
saved in the caller list.
Storing caller information into the
phonebook
1 Press {^} or {V} to enter the caller list.
2 Select the desired item.
L To edit the number, press {Edit}
repeatedly until the phone number is
shown in the desired format.
3 {Save}
L If there is the name information for
the caller, skip to step 5.
4 Enter the name (see the character
table, page 23). i {Next} i {Save}
5 {OFF}
Erasing selected caller information
1 Press {^} or {V} to enter the caller list.
2 Select the desired item.
3 {CLEAR} i {OFF}
Erasing all caller information
1 Press {^} or {V} to enter the caller list.
2 {All erase} i {Yes}
Example:
Example:
Example:
1-555-321-5555
321-5555
555-321-5555
TG262xC(e).book Page 29 Tuesday, January 24, 2006 6:03 PM