Item Meaning
In use
Answering system is being
used by the base unit or
another handset.
Line in use
Someone is using the line.
Initial settings
n Direct command code:
Programmable settings can be accessed by
pressing MMENUN, # and then the
corresponding code on the dial keypad
(page 19).
Example: Press MMENUN#110.
n Symbol meaning:
Symbol Meaning
Example:
MbN: “Off”
Press MCN or MDN to select
the words in quotations.
Important:
R When you install the batteries for the first time,
the handset may prompt you to set display
language and date and time.
Perform step 2 in “Display language”,
page 11, and then press MSELECTN.
Continue from step 2 in “Date and time”,
page 11.
Display language
You can select either “English” or “Français”
as the display language. The default setting is
“English”.
Base unit / Handset
1 MMENUN#110
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Base unit: MEXITN
Handset: MOFFN
Date and time
Handset
1 MMENUN#101
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 15, 2012
07 15 12
3 MOKN
4 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
5 MAM/PMN: Select “AM” or “PM”.
6 MSAVEN a MOFFN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
French is selected, 24-hour clock format is used.
R The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Voice guidance language
You can select either “English” or “Français”
as the voice guidance language of the Talking Call
Display and answering system. The default setting
is “English”.
Handset
1 MMENUN#112
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Handset
1 MMENUN#120
2 MbN: Select the desired setting.
3 MSAVEN a MOFFN
11
Getting Started
To Next Page
Loading...
