To Next PageTo Next PageWhy can't I dial the edited phone number on my Panasonic Cordless Telephone?
If you cannot dial the phone number edited in the caller list on your Panasonic Cordless Telephone, the phone number you dialed might have been edited incorrectly (for example, the long distance “1” or the area code is missing). Edit the phone number with another pattern.
Why does my Panasonic KX-TG4111C handset not ring?
If the handset of your Panasonic Cordless Telephone does not ring, check if the ringer volume is turned off and adjust it. Also, check if night mode is turned on and turn it off.
How to fix a Panasonic KX-TG4111C Cordless Telephone when the handset does not ring?
If your Panasonic Cordless Telephone handset isn't ringing, the ringer volume might be turned off; adjust the ringer volume. Also, check if night mode is turned on and turn it off, if necessary.
What to do if Panasonic KX-TG4111C battery still flashes after charging?
If you've fully charged the batteries of your Panasonic Cordless Telephone, but it still flashes, displays – 0, or has a shorter operating time, clean the battery ends and the charge contacts with a dry cloth and charge again. If the problem persists, it may be time to replace the batteries.
What to do if my Panasonic KX-TG4111C Cordless Telephone does not work?
If your Panasonic Cordless Telephone unit does not work, make sure the batteries are installed correctly. Fully charge the batteries. Check the connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect the adaptor and try again. The handset may not be registered to the base unit; register the handset.
Why is caller information displayed late on my Panasonic KX-TG4111C?
If caller information is displayed or announced late on your Panasonic Cordless Telephone, the unit may display or announce the caller’s information at the 2nd ring or later, depending on your service provider/telephone company. Also, try moving closer to the base unit.
What to do if liquid entered my Panasonic KX-TG4111C Cordless Telephone?
If liquid or other form of moisture has entered your Panasonic Cordless Telephone handset/base unit, disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit still does not work properly, contact an authorized service centre.
Why can't I make long distance calls on my Panasonic KX-TG4111C?
If you cannot make long distance calls on your Panasonic Cordless Telephone, make sure that you have long distance service.
Why Panasonic KX-TG4111C does not record new messages?
If the unit does not record new messages, ensure that the answering system is turned on. Also, the message memory might be full, so erase unnecessary messages. If the recording time is set to “Greeting only”, change the setting. If you subscribe to a Voice Mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit’s number of rings setting or contact your service provider/telephone company.
What to do if I cannot register a handset to a Panasonic Cordless Telephone base unit?
If you cannot register a handset to a base unit of your Panasonic Cordless Telephone, the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG4111C |
| Category | Cordless Telephone |
| Language | English |
Details the different models in the series and their included parts for base unit and handset.
Essential safety guidelines covering power connection, installation, operating safeguards, and medical considerations.
Comprehensive safety precautions to reduce risks of fire, electric shock, and injury to persons.
Step-by-step instructions for connecting the base unit and charger, including DSL filter usage.
Instructions for installing, charging, and handling rechargeable Ni-MH batteries.
Guides through initial setup of display language and date/time, including direct command codes.
Guides on initiating calls, using the speakerphone, and adjusting audio volume.
Introduces how to customize unit features using handset menus or direct codes.
Details on storing unwanted callers, blocking numbers, and managing the call block list.
Procedures for registering new handsets and cancelling existing registrations.
Overview of Call Display features, including how caller information is displayed and handled.
Details on using Call Waiting Deluxe, including activation and service options.
Specific steps for using Call Waiting Deluxe options and managing the caller list.
Introduction to the answering system features and capabilities.
Covers playback controls, calling back, and remote access code setup.
Instructions for listening to and erasing messages via base unit and handset.
Guides on operating the system remotely and managing the remote access code.
Explains the service and how to store/erase the VM access number.
Guides on how to access and listen to voice mail messages using the phone unit.
Lists common error messages and provides solutions for each.
Addresses issues like handset not turning on, no dial tone, and busy signals.
Solutions for handset beeping, low battery indication, and short operating time.
Solutions for issues with caller information display, announcements, and time shifts.
Addresses issues like display indicators, noise, no ring, and inability to make calls.
