Panasonic KX-TG4381AL - The Phonebook

Caller ID Service
29
Editing a caller’s phone
number before calling back
You can edit a phone number in the
caller list.
1 {View CID}
2 {V}/{^}: Select the desired entry.
i {Select} i {Edit}
3 Add or erase digits to the beginning
of the number as necessary.
L To add a digit, press the desired
dial key.
L To erase a digit, press {Clear} or
{#}.
4 {C}
Note:
L The edited phone number is not saved
in the caller list.
Erasing selected caller
information
1
{View CID}
2 {V}/{^}: Select the desired entry.
3 {Erase} i {Yes} i {OFF}
Erasing all caller information
1
{View CID}
2 {All erase} i {Yes}
Storing caller information into
the phonebook
1
{View CID}
2 {V}/{^}: Select the desired entry.
i {Select}
L To edit the number, press {Edit},
then edit the number (see step 3,
“Editing a caller’s phone number
before calling back”, page 29).
3 {Save}
L If there is name information for the
caller, go to step 5.
4 Enter the name (16 characters max.;
page 19). i {Next} i {Save}
5 {OFF}
TG43xxAL(e)_OI.book Page 29 Friday, May 23, 2008 3:51 PM