Panasonic KX-TG4381NZ - Battery Installation and Replacement

Preparation
13
telephone line between the base unit
and the telephone line socket in the
event of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Battery installation and
replacement
Important:
L Use the supplied rechargeable
batteries (Part No. HHR-65AAAB).
L When installing the batteries:
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Ensure correct polarities (S, T).
L When replacing the batteries:
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use
Alkaline/Manganese/Ni-Cd
batteries.
– We recommend using the
Panasonic rechargeable batteries
noted on page 5, 7.
1 Press the notch on the handset
cover firmly, and slide it in the
direction of the arrow.
2 Insert the batteries negative (T)
end first. Close the handset cover.
Note:
L When replacing batteries, remove the
old batteries.
To single-line
telephone socket
DSL/ADSL filter
Rechargeable Ni-MH ONLY
TG43xxNZ(e)_OI.book Page 13 Tuesday, August 26, 2008 1:58 PM