Programming
27
Note:
L To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
L If you select “Once”, the setting
changes to “Off” after the alarm
sounds.
L When the ringer volume for outside
calls is set to off (page 24), the alarm
sound is heard at a low level.
TG43xxNZ(e)_OI.book Page 27 Tuesday, August 26, 2008 1:58 PM
To Next Page
Loading...
