To Next PageTo Next PageWhat to do if my Panasonic KX-TG5050C Cordless Telephone says 'No link to base'?
If your Panasonic Cordless Telephone displays 'No link to base' and sounds an alarm, it means the handset has lost communication with the base unit. Try walking closer to the base unit. Also, ensure that the base unit’s AC adapter is properly plugged in and raise the base unit antennas.
Why is my Panasonic KX-TG5050C Cordless Telephone handset not working?
If your Panasonic Cordless Telephone handset isn't working, there are several things to check: * Verify the settings. * Ensure the dialing mode setting is correct. * Fully charge the battery. * Clean the charging contacts and charge again. * Check the battery installation. * Unplug the base unit’s AC adapter to reset it, then plug it back in. * Re-install the battery and fully charge it.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG5050C |
| Category | Cordless Telephone |
| Language | English |
The handset is powered by a rechargeable Ni-MH battery. Charge the battery for 6 hours before initial use.
Details the controls and indicators on the base unit of the cordless phone.
Details the controls and indicators on the handset of the cordless phone.
Guides on connecting the AC adaptor and telephone line cord to the base unit.
Step-by-step instructions for inserting the battery into the handset.
Instructions on how to charge the handset battery before initial use.
Explains when to recharge the battery and provides information on battery replacement.
Step-by-step guide on how to make a phone call using the handset.
Instructions for making calls using the speakerphone feature.
Instructions on how to answer a call when the unit rings.
Step-by-step guide to storing names and phone numbers in the phone book.
Instructions on how to make calls using numbers stored in the phone book.
Guide on entering your voice mail access number into the phone.
Instructions on how to access and listen to voice mail messages.
Instructions for using Call Waiting service during a conversation.
How to enable Call Waiting Deluxe service options.
Options for managing a second call when using Call Waiting Deluxe.
Instructions for re-registering a handset to the base unit if communication is lost.
Indicates the battery needs charging and provides remedies.
Indicates the battery is discharged and the handset won't work.
Indicates lost communication with the base unit and possible remedies.
Indicates an error occurred, often during re-registration.
Troubleshoots lost communication between handset and base unit.
Troubleshooting steps for when the handset or base unit fails to operate.
Addresses issues with sound quality due to interference.
Troubleshooting for missing caller ID information.
Explains battery status indicators and their meanings.
Explains discharged battery state and the need for charging.
Addresses potential battery replacement needs.
Troubleshooting for headset connection or usage issues.
General safety precautions for using the unit.
A critical warning about product exposure to rain or moisture.
