Programmable Settings
20
Base unit ringer tone (use either the handset or the base unit)
Make sure the base unit is not being used.
Selecting the base unit ringer tone by using the
1
Press
[f] or [g]
.
• The base unit will ring using the current ringer tone. If the ringer volume has
been turned off, the base unit will not ring (p. 19).
2 Press [f] or [g] repeatedly to select the desired tone.
• Each time you press [f] or [g], another ringer tone will be heard and
selected.
• To stop ringing, press [0].
• You can also select the ringer tone by pressing [1] to [7].
[1] to [3]: Bell ringer patterns [4] to [7]: Melody patterns
1
Press
[MENU]
.
2 Scroll to “Initial setting” by pressing [d] or [B], then press the
soft key ( ).
3 Scroll to “Set base unit” by pressing [d]
or [B], then press the soft key ( ).
4 Press the soft key ( ) at “Ringer
tone”.
5 Select the desired ringer tone by pressing
[d] or [B].
• When selecting the ringer tone, the base unit will
ring. If the base unit ringer volume has been
turned off, the base unit will not ring (p. 19).
• You can also select the ringer tone by pressing
[1] to [7].
[1] to [3]: Bell ringer patterns
[4] to [7]: Melody patterns
6 Press the soft key ( ), then press [OFF].
Base Unit
Handset
SELECT
SELECT
Set base unit
SELECT
Ringer tone
Ringer tone
1:Tone 1
SAVE
TG5230.fm Page 20 Wednesday, February 4, 2004 9:51 AM
To Next Page
Loading...
