To Next PageTo Next PageWhy can't I register my Panasonic KX-TG6511BXB Cordless Telephone handset?
If you cannot register a handset to a base unit of your Panasonic Cordless Telephone, it may be because the maximum number of handsets (6) is already registered. Cancel unused handset registrations from the base unit.
Why is caller ID delayed on my Panasonic KX-TG6511BXB?
If caller information is displayed or announced late on your Panasonic Cordless Telephone, it may be due to your service provider, who may display or announce the caller’s information at the 2nd ring or later. Also, try moving closer to the base unit.
Why can't I dial edited numbers on my Panasonic KX-TG6511BXB Cordless Telephone?
If you cannot dial the phone number edited in the caller list on your Panasonic Cordless Telephone, the phone number might have been edited incorrectly (for example, the long distance “1” or the area code is missing). Edit the phone number with another pattern.
Why doesn't my Panasonic KX-TG6511BXB Cordless Telephone show the 2nd caller ID?
If the 2nd caller’s information is not displayed during an outside call on your Panasonic Cordless Telephone, you must subscribe to Caller ID, call waiting, or Call Waiting Caller ID (CWID) from your service provider. After subscribing, you may need to contact them again to activate the specific service.
Why can't I operate the answering system on my Panasonic KX-TG6511BXB Cordless Telephone?
If you cannot operate the answering system on your Panasonic Cordless Telephone, someone else might be using the unit, or a caller might be leaving a message; wait for them to finish. The handset might also be too far from the base unit, so move closer.
Why can't I remotely access my Panasonic KX-TG6511BXB answering system?
If you cannot operate the answering system remotely on your Panasonic Cordless Telephone, ensure the remote access code is set. You might be entering the wrong remote access code, so check your current code. Press each key firmly. Also, the answering system might be turned off, so turn it on.
What to do if my Panasonic KX-TG6511BXB got wet?
If liquid or other moisture has entered your Panasonic Cordless Telephone handset/base unit, disconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After drying, reconnect the AC adaptor and telephone line cord, insert the batteries, and charge fully before use. If it still doesn't work, contact an authorized service center.
Why is caller information not displayed on my Panasonic KX-TG6511BXB Cordless Telephone?
Several factors can cause caller information not to be displayed. First, ensure you subscribe to Caller ID service. If your unit connects to additional telephone equipment such as a Caller ID box or cordless telephone line jack, plug the unit directly into the wall jack. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack. Also, the name display service may not be available in some areas, or other telephone equipment may be interfering with this unit, so disconnect the other equipment and try again.
Why does the handset beep and/or flash on my Panasonic Cordless Telephone?
If the handset of your Panasonic Cordless Telephone beeps and/or flashes, fully charge the batteries.
Why does my Panasonic KX-TG6511BXB Cordless Telephone beep and flash?
If your Panasonic Cordless Telephone handset beeps and/or the phone icon flashes, it indicates that the battery charge is low. You should fully charge the batteries.
General| Brand | Panasonic |
|---|---|
| Model | KX-TG6511BXB |
| Category | Cordless Telephone |
| Language | English |
