To Next PageTo Next PageWhat to do if the name stored in the phonebook is not fully displayed while an outside call is being received on my Panasonic KX-TG6711E Cordless Telephone?
Edit the phonebook entry name to fit in 1 line of text.
What to do if the Panasonic KX-TG6711E Cordless Telephone unit does not work?
Ensure the batteries are installed correctly and are fully charged. Check the connections. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset, then reconnect the adaptor, turn on the handset, and try again. Also, ensure the handset has been registered to the base unit; if not, register the handset.
What to do if my Panasonic KX-TG6711E handset does not ring?
Check if the ringer volume is turned off and adjust it accordingly. Also, verify that night mode is not turned on, as this silences the ringer. Turn off night mode if it is enabled.
What to do if I cannot make a call on my Panasonic Cordless Telephone?
Check if you are dialing a restricted number. Also, make sure the key lock feature is turned off.
What to do if the Panasonic KX-TG6711E handset beeps and/or flashes?
Fully charge the batteries.
Why is there noise, and the sound cuts in and out on my Panasonic Cordless Telephone?
You might be using the handset or base unit in an area with high electrical interference. Try re-positioning the base unit and use the handset away from sources of interference. Also, try moving closer to the base unit. If you use a DSL/ADSL service, connecting a DSL/ADSL filter between the base unit and the telephone line jack is recommended.
What to do if I cannot register a handset to a base unit on my Panasonic KX-TG6711E Cordless Telephone?
This could be because the maximum number of handsets (6) is already registered to the base unit. Cancel unused handset registrations from the base unit. Also, you may have entered the wrong PIN. If you forget your PIN, see 'I cannot remember the PIN.'
What to do if I cannot activate the eco mode on my Panasonic KX-TG6711E?
You cannot set eco mode when you set the repeater mode 'On'. If required, set the repeater mode to 'Off'.
What to do if I fully charged the batteries, but they still flash or the operating time seems to be shorter on my Panasonic KX-TG6711E?
Clean the battery ends (, ) and the charge contacts with a dry cloth and charge again. If the problem persists, it is time to replace the batteries.
What to do if the Panasonic KX-TG6711E base unit does not ring?
Check if the ringer volume is turned off and adjust it.
General| Type | Cordless Telephone |
|---|---|
| Number of Handsets | 1 |
| Talk Time | 15 hours |
| Standby Time | 170 hours |
| Caller ID | Yes |
| Display | LCD |
| Frequency | 1.9 GHz |
| GAP compatible | Yes |
| Answering Machine | No |
| DECT | Yes |
| Call Waiting | Yes |
| Speakerphone | Yes |
| Intercom | Yes |
| Power Source | AC Adapter |
| Ringer ID | Yes |
| Range | Up to 50m indoor, 300m outdoor |
| Battery Type | NiMH |
| Phonebook Capacity | 50 entries |
| Display Type | Backlit LCD |
Details the base unit and handset components for different series.
Lists supplied and optional accessories for various models.
Provides essential details on equipment compliance and contact information.
Crucial warnings and precautions for safe product operation and power connection.
Instructions on proper handling, charging, and precautions for rechargeable batteries.
Guidance on optimal placement of the base unit for clear communication and avoiding interference.
Step-by-step guide for connecting the base unit, charger, and telephone line.
Instructions for inserting batteries and initial charging for handset operation.
Identifies handset buttons, their functions, and key display icons for user interaction.
How to turn the unit on/off and configure essential initial settings like date and time.
Explains the top key function and eco mode for power saving.
Instructions for securely mounting the base unit and charger onto a wall.
Step-by-step guide to dial numbers, use speakerphone, and manage calls using the redial list.
How to answer incoming calls and use the smart function key for quick response.
Explains features like Hold, Mute, Recall/Flash, Call Waiting, and Handset Equalizer.
How to lock the handset to prevent unauthorized use and join existing calls.
Features for adding, finding, editing, and erasing entries in the phonebook.
Instructions for transferring entries between handsets.
Accessing and customizing unit features via menus or direct command codes.
How to set and manage alarm functions, night mode, and call barring.
Procedures for adding/removing handsets and changing the base unit PIN.
Explains how caller information is displayed and logged, including missed calls.
How to view, call back, edit, erase, and store caller list entries.
Turning the system on/off, managing greeting messages, and listening to messages.
How to manage the answering system remotely and adjust settings like ring count.
Explains the service offered by providers and its interaction with the unit's answering system.
How to make, answer, and transfer intercom and conference calls between handsets.
How to page a misplaced handset to find its location.
Guide to using dial keys for character input and different entry modes.
Lists common display messages and their corresponding causes and solutions.
Provides solutions for common problems encountered with the unit's operation.
Instructions for liquid damage and details of the product warranty terms.
Alphabetical listing of topics and their corresponding page numbers for easy reference.
