To Next PageTo Next PageHow to fix a Panasonic Telephone when the handset doesn't ring?
If the handset on your Panasonic Telephone does not ring, check if the ringer volume is turned off and adjust it. Also, check if night mode is turned on and turn it off.
How to fix Panasonic KX-TG6823E when I cannot hear a dial tone?
If you cannot hear a dial tone on your Panasonic Cordless Telephone, ensure you're using the supplied telephone line cord. Check that the base unit’s AC adaptor or telephone line cord is connected properly. Disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, contact our service personnel to have the unit repaired. If the working telephone does not operate properly, contact your service provider/telephone company.
Why doesn't my Panasonic Telephone emit the specified number of rings?
If your Panasonic Telephone does not emit the specified number of rings, it may be because if the first ring is turned off, the number of rings decreases by 1 from the specified number of rings.
How to fix caller ID not showing on Panasonic Telephone?
If caller information is not displayed on your Panasonic Telephone, make sure that you subscribe to a Caller ID service. Also, if your unit is connected to any additional telephone equipment, remove it and plug the unit directly into the wall jack. If you use a DSL/ADSL service, consider connecting a DSL/ADSL filter between the base unit and the telephone line jack. Other telephone equipment may be interfering with this unit. Disconnect the other equipment and try again.
How to fix a blank display on Panasonic Telephone?
To fix a blank display on your Panasonic Telephone, turn the power on.
Why has the time shifted on my Panasonic Telephone?
If the time on your Panasonic Telephone has shifted, it is likely due to incorrect time information from incoming Caller ID changing the time. Set the time adjustment to 'Manual' (off).
Why can't I register a handset to my Panasonic Telephone base unit?
If you cannot register a handset to your Panasonic Telephone base unit, it may be because the maximum number of handsets (6) is already registered. Cancel unused handset registrations from the base unit. Alternatively, you may have entered the wrong PIN.
Why is caller information slow to display on my Panasonic Telephone?
Caller information may be slow to display on your Panasonic Telephone because, depending on your service provider/telephone company, the unit may display the caller’s information at the 2nd ring or later. Set the first ring to 'Off'. Also, try moving closer to the base unit.
Why doesn't the base unit of my Panasonic Telephone ring?
If the base unit of your Panasonic Telephone does not ring, the ringer volume may be turned off. Adjust the ringer volume.
Why my Panasonic KX-TG6823E Cordless Telephone does not work?
If your Panasonic Cordless Telephone is not working, ensure the batteries are installed correctly. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit, then reconnect it and try again. The handset might not be registered to the base unit, so register the handset.
General| Type | Cordless Telephone |
|---|---|
| Number of Handsets | 3 |
| Talk Time | 15 hours |
| Standby Time | 170 hours |
| Display | 1.8 inch LCD |
| Caller ID | Yes |
| Intercom | Yes |
| DECT Technology | Yes |
| GAP compatible | Yes |
| Answering Machine | Yes |
| Recording Time | 30 minutes |
| Call Block | Yes |
| Backup Power | No |
| Range | Up to 300 meters outdoors |
| Phonebook Capacity | 100 entries |
Details the different models and their components, including base units and handsets.
Lists the accessories supplied with the product and their quantities for various models.
Crucial safety instructions to prevent injury and property damage, covering power connection and installation.
Instructions for battery usage, handling, charging, and disposal, emphasizing Ni-MH batteries.
Instructions for connecting the base unit and charger to power and telephone lines.
Identifies and explains the functions of handset and base unit controls.
Describes the function and usage of the Smart Function Key for quick access to features.
Step-by-step instructions for dialling numbers manually.
How to answer incoming calls using the handset or any dial key.
How to lock the handset to prevent unauthorized use and how to unlock it.
Step-by-step guide to adding new contacts with names and phone numbers.
Dialing numbers quickly by pressing and holding assigned speed dial keys.
Overview of customising unit features via menus or direct command codes.
Customizing ringer volume, tone, night mode, and ring delay for handsets and base unit.
Blocking unwanted calls by storing numbers in a restricted list.
Prerequisites and benefits of using the Caller ID service.
Information about the caller list, including access limitations and date/time accuracy.
Instructions for activating and deactivating the answering system on the base unit and handset.
How to access and listen to new or all messages using the handset.
Explanation of voice mail as an automatic answering service provided by the service provider.
Making intercom calls between handsets and related notes.
How to locate a misplaced handset by paging it from the base unit or another handset.
Lists common display messages and their causes/solutions for troubleshooting.
General troubleshooting steps for common problems with the handset, unit operation, and display.
Explains the terms and conditions of the product guarantee, including exclusions and warranty period.
