Panasonic KX-TG6823E - User Manual

Questions and Answers:

G
gbrandtAug 29, 2025
What to do if Panasonic KX-TG6823E Cordless Telephone handset does not turn on?
- D
  desireeharrisAug 29, 2025
  If your Panasonic Cordless Telephone handset doesn't turn on, even with charged batteries, try these steps: Place the handset on the base unit or charger. Ensure the batteries are correctly installed. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset, then reconnect the adaptor and try again. Also, the handset may not be registered to the base unit; in this case you should register it.
N
Nancy PayneAug 28, 2025
Why is my Panasonic Telephone not recording new messages?
- C
  Curtis KellyAug 28, 2025
  If your Panasonic Telephone is not recording new messages, ensure that the answering system is turned on. If the message memory is full, erase unwanted messages. Check if the recording time is set to 'Greeting Only' and change the setting if needed. If you subscribe to a voice mail service, messages are recorded by your service provider/telephone company, not your telephone. Change the unit’s number of rings setting or contact your service provider/telephone company.
X
Xavier MillerAug 27, 2025
Why I cannot make a call from my Panasonic Telephone?
- A
  Angel DelgadoAug 27, 2025
  If you cannot make a call on your Panasonic Telephone, you may have dialled a call restricted number. Also, verify that the key lock feature is turned off.
P
perrydanaAug 26, 2025
Why is my Panasonic Telephone base unit beeping?
- J
  jenkinschelseaAug 27, 2025
  If the base unit of your Panasonic Telephone is beeping, it indicates that new messages have been recorded. Listen to the new messages.
W
William HarrisAug 25, 2025
Why can't I hear a dial tone on my Panasonic Telephone?
- J
  Janet GarciaAug 26, 2025
  If you cannot hear a dial tone on your Panasonic Telephone, ensure that you are using the supplied telephone line cord, as your old cord may have a different wiring configuration. Check that the base unit’s AC adaptor or telephone line cord is connected properly. To further diagnose the issue, disconnect the base unit from the telephone line and connect the line to a known working telephone. If the working telephone operates properly, the unit may need repair. If the working telephone does not operate properly, contact your service provider/telephone company.
G
Gary CastroAug 25, 2025
What to do if my Panasonic Telephone does not work?
- C
  Candace MartinAug 25, 2025
  If your Panasonic Telephone is not working, ensure the batteries are correctly installed. Fully charge the batteries. Check all connections. Unplug the base unit’s AC adaptor to reset the unit and turn off the handset; then reconnect the adaptor, turn on the handset, and try again. Also, the handset may not be registered to the base unit, so you may need to register the handset.

Panasonic KX-TG6823E Specifications

General

Type	Cordless Telephone
Number of Handsets	3
Talk Time	15 hours
Standby Time	170 hours
Display	1.8 inch LCD
Caller ID	Yes
Intercom	Yes
DECT Technology	Yes
GAP compatible	Yes
Answering Machine	Yes
Recording Time	30 minutes
Call Block	Yes
Backup Power	No
Range	Up to 300 meters outdoors
Phonebook Capacity	100 entries