123
*1 If you program these settings using one of the
handsets, you do not need to program the
same item using another handset.
*2 This menu is not displayed when scrolling
through the display menus. It is only available
in direct command code.
*3 When the cellular line only mode is turned on,
these menus are not displayed (page 66).
*4 After the Bluetooth device is registered, the
device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 If you select one of the melody ringer tones,
the ringer tone continues to play for several
seconds even if the caller has already hung up.
You may either hear a dial tone or no one on
the line when you answer the call.
*8 The preset melodies in this product are used
with permission of © 2009 Copyrights Vision
Inc.
To Next Page
Loading...
