218
Liquid damage
Problem: Liquid or other form of moisture has
entered the handset/base unit.
Cause/solution:
• Disconnect the AC adaptor and telephone line cord
from the base unit. Remove the batteries from the
handset and leave to dry for at least 3 days. After
the handset/base unit are completely dry,
reconnect the AC adaptor and telephone line cord.
Insert the batteries and charge fully before use. If
the unit does not work properly, contact an
authorized service center.
Caution:
• To avoid permanent damage, do not use a
microwave oven to speed up the drying process.
FCC and other information
This equipment complies with Part 68 of the FCC
rules and the requirements adopted by the ACTA. On
the bottom of this equipment is a label that contains,
among other information, a product identifier in the
To Next Page
Loading...
