219
format US:ACJ----------.
If requested, this number must be provided to the
telephone company.
• Registration No...... (found on the bottom of the
unit)
• Ringer Equivalence No. (REN).......0.1 B
A plug and jack used to connect this equipment to
the premises wiring and telephone network must
comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with the
product. It is designed to be connected to a
compatible modular jack that is also compliant.
The REN is used to determine the number of devices
that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most
but not all areas, the sum of RENs should not exceed
five (5.0). To be certain of the number of devices
that may be connected to a line, as determined by
the total RENs, contact the local telephone company.
For products approved after July 23, 2001, the REN
To Next Page
Loading...
