89
Note:
• While on a call, you can switch from the base unit
to the handset:
Press on the handset, then press
[SP-PHONE] on the base unit with the call
sharing mode on (page 94).
If the handset is on the base unit, simply lift it.
Redialing the last number dialed
[SP-PHONE] then [REDIAL]
Pause (for PBX/long distance service users)
A pause is sometimes required when making calls
using a PBX or long distance service. When storing a
calling card access number and/or PIN in the
phonebook, a pause is also needed (page 106).
Example: If you need to dial the line access number
“9” when making outside calls with a PBX:
1. [SP-PHONE]
2. [9] then [PAUSE]
3. Dial the phone number.
To Next Page
Loading...
