125
*14
If you subscribe to a Caller ID service and want
to view the caller’s information after lifting up
the handset to answer a call, turn off this
feature.
*15
The flash time depends on your telephone
exchange or host PBX. Contact your PBX
supplier if necessary. The setting should stay at
“700 ms” unless pressing [FLASH] fails to pick
up the waiting call.
*16
Generally, the line mode setting should not be
changed. This setting automatically maintains
receiver volume at the proper level depending
on the current telephone line condition. Set the
line mode to “A” if telephone line condition is
not good.
To Next Page
Loading...
