199
General use
Problem: The handset does not turn on even after
installing charged batteries.
Cause/solution:
• Place the handset on the base unit or charger to
turn on the handset.
Problem: The unit does not work.
Cause/solution:
• Make sure the batteries are installed correctly
(page 29).
• Fully charge the batteries (page 33).
• Check the connections (page 33).
• Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
• The handset has not been registered to the base
unit. Register the handset (page 134).
Problem: I cannot register a cellular phone to the
base unit.
To Next Page
Loading...
