201
Cause/solution:
• Confirm that your cellular phone is turned on.
• Confirm that your cellular phone is within base
unit range (page 45).
• Depending on the state of the wireless
environment, such as the presence of any
electrical interference, there may be a delay even
if the auto connection feature is turned on. You
can connect to the base unit manually (page 63).
• The cellular phone has not been registered to the
base unit. Register the cellular phone (page 56).
Problem: I cannot hear a dial tone.
Cause/solution:
• Make sure the base unit’s AC adaptor is connected
properly (page 29).
• Make sure that the CELL 1 or CELL 2 indicator
lights green (page 45).
• Make sure the telephone line cord is connected
properly (page 33).
• Disconnect the base unit from the telephone line
To Next Page
Loading...
