92
*1 The call is taken when:
– only 1 cellular phone is registered.
– the line is set to make cellular calls (page
87).
To release hold on the landline: Press
[SP-PHONE].
A handset user can take the landline call by
pressing .
Note:
• While a cellular line is on hold, the CELL 1 or CELL
2 indicator flashes red. While a landline call is on
hold, the SP-PHONE indicator flashes.
• If a call is kept on hold for more than 9 minutes,
an alarm tone starts to sound. After 1 additional
minute on hold, the call is disconnected.
• If another phone is connected to the same line,
you can also take the call by lifting its handset.
Mute
While mute is turned on, you can hear the other
party, but the other party cannot hear you.
To Next Page
Loading...
