– 7 –
Registering a handset to a base unit
The supplied handset and base unit are pre-registered. If for some reason the
handset is not registered to the base unit, re-register the handset.
1 K (middle soft key) i N i M
2 {V}/{^}: “Registration” i M 2times
3 {V}/{^}: Select a base unit number. i M
Press and hold {x} for about 5 seconds.
(No registration tone)
LThe next step must be completed within 90
seconds.
Wait until “Enter Base PIN” is displayed. i
Enter the base unit PIN (default: “0000”). i
M
LWhen the handset has been registered
successfully, w stops flashing.
Handset
M
Base unit
{x}
Handset
M
TG8011E(e)_QG.fm Page 7 Thursday, June 4, 2009 11:26 AM
To Next Page
Loading...
