Panasonic KX-TG8200E

Preparation
13
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Turning the power
on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
Setting up the unit
before use
Display language
1
{ih} i "
2 Select N by pushing the joystick in
any direction. i #
3 Push the joystick up or down to
select “Display Setup”. i #
4 Push the joystick up or down to
select “Select Language”. i
#
5 Push the joystick up or down to
select the desired language. i
# i {ih}
Note:
L If you select a language you cannot
read: {ih } i " i N i #
i Push the joystick down 2 times.
i # i Push the joystick down 3
times. i # i
{^}/{V}: Select the desired language.
i # i {ih }
Date and time
1
" (centre of joystick)
2 Select N by pushing the joystick in
any direction. i #
3 Push the joystick up or down to
select “Time Settings”. i #
4 Push the joystick up or down to
select “Set Date & Time”. i
#
5 Enter the current date, month, and
year.
Example: 17 May, 2007
{1}{7} {0}{5} {0}{7}
6 Enter the current hour and minute.
Example: 3:30 PM
{0}{3} {3}{0} i Press {*} until
“03:30 PM” is displayed.
7 # i {ih}
Note:
L To correct a digit, use the joystick to
move the cursor to the digit, then
make the correction.
L The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
TG8200_20E.book Page 13 Monday, June 18, 2007 9:03 AM