Programming
25
For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1
{MENU} i {# }
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Note:
L In the following table, < > indicates the default settings.
Feature Feature
code
Setting code System
setting
*1
Page
Alarm {7}{2}{0}{1}: Once {2}: Daily
{0}: <Off>
–29
Auto talk
*2
{2}{0}{0}{1}: On {0}: <Off>–18
Block calls {2}{1}{7} – r 28
Caller ID edit
(Caller ID number
auto edit)
{2}{1}{4}{1}: <On> {0}: Off r 32
Customer
support
{6}{8}{0} ––30
Date and time {1}{0}{1} – r 16
Deregistration {1}{3}{1} ––30
Display
(Change language)
{1}{1}{0}{1}: <English>
{2}: Español
–15
HS
registration
(Handset
registration)
{1}{3}{0} ––30
Key tone
*3
{1}{6}{5}{1}: <On> {0}: Off ––
LCD contrast
(Display contrast)
{1}{4}{5}{1}–{6}: Level 1–6 <3> – –
Message alert {3}{4}{0}{1}: <On> {0}: Off –39
Message play {3}{0}{0} ––36
Night mode
(On/Off)
{2}{3}{8}{1}: On {0}: <Off>–29
Night mode
(Start/End)
{2}{3}{7} <11:00 PM/06:00 AM>– 29
Recording time {3}{0}{5}{1}: 1min {2}: 2min
{3}: <3min>
{0}: Greeting only
r 39
Remote code {3}{0}{6} <111> r 37
TG93XX_OI.book Page 25 Thursday, December 27, 2007 3:38 PM
To Next Page
Loading...
