Panasonic KX-TG9331T - Page 26

Programming
26
For assistance, please visit http://www.panasonic.com/help
*1 If “System setting” column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
Ring count {2}{1}{1}{2}–{7}: 2–7 rings <4>
{0}: Toll saver
r 38
Ringer tone
*4, *5
(Handset)
{1}{6}{1}{1}–{3}: Tone <1>–3
{4}–{7}: Melody 1–4
––
Ringer volume
(Handset)
{1}{6}{0}{1}: Low {2}: Medium
{3}: <High> {0}: Off
––
Set dial mode {1}{2}{0}{1}: Pulse
{2}: <Tone>
r 15
Set flash
time
*6
{1}{2}{1}{1}: <700ms>
{2}: 600ms
{3}: 400ms
{4}: 300ms
{5}: 250ms
{6}: 110ms
{7}: 100ms
{8}: 90ms
r 19
Set line mode
*7
{1}{2}{2}{1}: A {2}: <B> r –
Store VM
access#
{3}{3}{1} – r 40
Talking
CallerID
(Handset)
{1}{6}{2}{1}: <On> {0}: Off –31
Talking
CallerID
(Base unit)
{*}{1}{6}
{2}
{1}: <On> {0}: Off r 31
Time
adjustment
*8
(Caller ID
subscribers only)
{2}{2}{6}{1}: <Caller ID
[auto]>
{0}: Manual
r –
V.M. access {3}{3}{0} ––41
VM tone detect {3}{3}{2}{1}: <On> {0}: Off r 40
Voice prompt
(Change language)
{1}{1}{2}{1}: <English>
{2}: Español
r 15
Feature Feature
code
Setting code System
setting
*1
Page
TG93XX_OI.book Page 26 Thursday, December 27, 2007 3:38 PM