Preparation
12
For assistance, please visit http://www.panasonic.com/help
Connections
Connecting the AC adaptor/corded handset
Connect the AC adaptor cord (A) by pushing the plug firmly (B). Connect the corded handset cord (C)
to the corded handset and the base unit.
Base unit
L Use only the supplied Panasonic AC adaptor PQLV207 or PQLV219.
Charger
L Use only the supplied Panasonic AC adaptor PQLV209 or PQLV219.
Note:
L The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during
use.)
L The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to
become disconnected.
During a power failure
The base unit will work as a standard telephone using power from the telephone line. Line 1 on the
corded handset can be used to make and answer calls. The base unit speakerphone and the cordless
handset will not function during a power failure.
(120 V AC, 60 Hz)
A
Hook
B
CCCCC
CCCCC
A
(120 V AC, 60 Hz)
Hooks
B
TG9391.book Page 12 Tuesday, July 8, 2008 8:01 AM
To Next Page
Loading...
