Preparation
17
For assistance, please visit http://www.panasonic.com/help
4 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Date and time
Program this setting using either the base unit or
one of the handsets.
1 {MENU} i {#}{1}{0}{1}
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example: September 15, 2008
{0}{9} {1}{5} {0}{8}
3 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
{0}{9} {3}{0}
4 Press {*} to select “AM” or “PM”.
5 {SAVE}
6 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Note:
L When English is selected as the display
language, 12-hour clock format is used. When
Spanish is selected, 24-hour clock format is
used.
L To correct a digit:
Base unit: Press {^}, {V}, {7}, or {8} to
move the cursor to the digit, then make the
correction.
Handset: Press {^}, {V}, {<}, or {>} to move
the cursor to the digit, then make the correction.
L The date and time may be incorrect after a
power failure. In this case, set the date and time
again.
Line selection mode
The line selection mode determines which line is
selected when:
– you lift the corded handset
– you press {SP-PHONE} on the base unit (when
making/answering calls)
– you press {C}/{s} on the handset (when
making/answering calls)
The following setting is available:
– “Auto” (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller list
(page 33) or while listening to a message (page
37, 38), the indicated line is used. When
answering a call, the ringing line is selected.
– “Line1”: Line 1 is selected.
– “Line2”: Line 2 is selected.
1 {MENU} i {#}{2}{5}{0}
2 {V}/{^}: Select the desired setting.
3 {SAVE}
4 Proceed with the operation for your unit.
Base unit: {■} (EXIT)
Handset: {OFF}
Note:
L You can select a line manually regardless of the
line selection mode by pressing {LINE 1} or
{LINE 2}.
: Base unit / Y Handset
: Base unit / Y Handset
TG9391.book Page 17 Tuesday, July 8, 2008 8:01 AM
To Next Page
Loading...
