Panasonic KX-TG9391

Programming
28
For assistance, please visit http://www.panasonic.com/help
Programming using the direct commands
1
{MENU} i {#}
2 Enter the desired feature code.
3 {V}/{^}: Select the desired setting. i {SAVE}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {■}(EXIT) on the base unit or {OFF} on the handset.
Note:
L The operating unit column shows the unit(s) that can be used to program the item.
:: Only the base unit can program the item.
Y: Only the handset can program the item.
:/Y: Both the base unit and handset can program the item.
L In the following table, < > indicates the default settings.
Operating
unit
Feature Feature
code
Setting System
setting
*1
Page
Y Alarm {7}{2}{0} <Off>
Once
Daily
–31
Y Auto talk
*2
{2}{0}{0} On
<Off>
–19
:/Y Caller ID edit
(Caller ID number auto
edit)
{2}{1}{4} <On>
Off
–34
:/Y Call screening {3}{1}{0} <On>
Off
–36
:/Y Contrast
(Display contrast)
{1}{4}{5} Level 1–6 <3> – –
:/Y Customer support {6}{8}{0} ––31
:/Y Date and time {1}{0}{1} – r 17
Y Deregistration {1}{3}{1} ––32
:/Y Display language {1}{1}{0} <English>
Español
–16
Y Erase all
(Erasing all messages)
{3}{2}{5} ––38
Y HS registration
(Handset registration)
{1}{3}{0} ––32
:/Y Interrupt tone
*3
{2}{0}{1} <On>
Off
–43
Y Key tone
*4
{1}{6}{5} <On>
Off
––
:/Y Line select {2}{5}{0} <Auto>
Line1
Line2
–17
:/Y Night mode
(On/Off)
{2}{3}{8} On
<Off>
–31
TG9391.book Page 28 Tuesday, July 8, 2008 8:01 AM