Status Meaning
Light on The line is in use.
Flashing
rapidly
A call is being received.
Flashing A call is put on hold or the
answering system is answering a
call.
Date and time
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1 MMENUN#101
2 Enter the current month, date, and year by
selecting 2 digits for each.
Example: July 15, 2013
07 15 13
3 MOKN
4 Enter the current hour and minute (12-hour
clock format) by selecting 2 digits for each.
Example: 9:30
09 30
5 Proceed with the operation for your unit.
Handset: *: Select MAMN or MPMN.
Base unit: MAM/PMN: Select MAMN or MPMN.
6 MSAVEN
7 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note:
R When English is selected as the display
language, 12-hour clock format is used. When
Spanish is selected, 24-hour clock format is
used.
Language setting
Display language
Handset / Base unit
1 MMENUN#110
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Voice guidance language
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1 MMENUN#112
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Other settings
Dialing mode
If you cannot make calls, change this setting
according to your telephone line service. The
default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
Program this setting using either the base unit or
one of the handsets.
Handset / Base unit
1 MMENUN#120
2 MbN: Select the desired setting. a MSAVEN
3 Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Line selection mode for landline
The line selection mode determines which line is
selected when:
– you press M
N/MZN on the handset (when
making/answering calls)
– you press MZN on the base unit (when making/
answering calls)
The following setting is available:
– “Auto” (default): When making a call, line 1 is
selected. If that line is unavailable, line 2 is
selected. When you call back using the caller
list (page 47) or while listening to a message
(page 56, 57), the indicated line is used.
16
For assistance, please visit http://www.panasonic.com/help
Getting Started
To Next Page
Loading...
