Panasonic KX-TGB812 - Getting Started; Initial Setup and Connections

11
For assistance, please visit http://shop.panasonic.com/support
Getting Started
Note:
 Use only the supplied AC adaptor
AT-332A-060045A.
Battery installation
1
Press down at
1
.
2 Slide the handset cover
2
.
3 Insert the batteries, then close
the handset cover.
 Use only the supplied GPI
International Ltd. rechargeable
Ni-MH batteries 30AAAHC(
A
).
 Do NOT use alkaline/
manganese/Ni-Cd batteries.
 
Setting up
Connections
 Base unit
Connect the telephone line cord
to the unit until you hear a click.
Connect the AC adaptor to the

Fasten the cord by hooking it.
Connect the AC adaptor to the
power outlet.
Connect the telephone line cord

(RJ11) until you hear a click.

is required if you have a DSL/
ADSL service.
Note:
 Use only the supplied AC adaptor
AT-332A-060045A.
 Charger
Connect the AC adaptor to the

Fasten the cord by hooking it.
Connect the AC adaptor to the
power outlet.
USE SPECIFIED AC ADAPTOR
ONLY
6 V DC
USE SPECIFIED AC ADAPTOR
ONLY
6 V DC
1
2
A
+
–
+
–
USE SPECIFIED AC ADAPTOR
ONLY
6 V DC
USE SPECIFIED AC ADAPTOR
ONLY
6 V DC
Hook
Hook