EasyManua.ls Logo

Panasonic KX-TGB812 - Page 7

Panasonic KX-TGB812
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
For assistance, please visit http://shop.panasonic.com/support
Important Information
The product is only use for

Note:
This height is not guaranteed
for product reliability.

to the product unexpectedly
falling, the product must be
installed at a height of 1.5 m
or lower.
This product is unable to make
calls when:
– the handset batteries need
recharging or have failed.
– there is a power failure.
Battery
We recommend using the
batteries noted on page 4.
USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
Do not mix old and new batteries.
Do not open or damage the
batteries. Released electrolyte
from the batteries is corrosive

the eyes or skin. The electrolyte
is toxic and may be harmful if
swallowed.
Exercise care when handling the
batteries. Do not allow conductive
materials such as rings, bracelets,
or keys to touch the batteries,
otherwise a short circuit may
cause the batteries and/or the
conductive material to overheat
and cause burns.
personal medical devices, such
as pacemakers or hearing aids, to
determine if they are adequately
shielded from external RF (radio
frequency) energy. (The product
operates in the frequency range
of 1.92 GHz to 1.93 GHz, and the
RF transmission power is 115 mW
(max.).)
Do not use the product in health
care facilities if any regulations
posted in the area instruct you not
to do so. Hospitals or health care
facilities may be using equipment
that could be sensitive to external
RF energy.
CAUTION
Installation and location
Never install telephone wiring
during an electrical storm.



locations.
Never touch uninsulated
telephone wires or terminals
unless the telephone line has
been disconnected at the network
interface.
Use caution when installing or
modifying telephone lines.
Disconnect the telephone line
before replacing batteries.
The AC adaptor is used as the
main disconnect device. Ensure
that the AC outlet is installed
near the product and is easily
accessible.

Related product manuals