plays a different pre-recorded greeting
message asking callers to call again.
Resetting to a pre-recorded greeting
message
Use this procedure to erase your greeting
message and use a pre-recorded one.
1 M N#304
2 MOKN a M
N
Playing back the greeting
message
1 M
N#303
2 M N
Listening to messages
Using the base unit
When new messages have been recorded,
the message indicator M N on the base unit
flashes.
Press M N.
R If new messages have been recorded, the
base unit plays back new messages.
R If there are no new messages, the base
unit plays back all messages.
Operating the answering system
during playback
Key Operation
MjN or MkN Adjust the speaker volume
M N
Repeat message
*1
M N Skip message
M N Stop playback
M N
Erase currently playing
message
*1 If pressed within the first 5 seconds of a
message, the previous message is
played.
Erasing all messages
Press M N 2 times while the unit is not in use.
Using the handset
When new messages have been recorded,
is displayed on the handset with the total
number of new messages.
1 To listen to new messages:
M N#323
To listen to all messages:
M
N#324
2 When finished, press M N.
Note:
R To switch to the receiver, press M
N.
Operating the answering system
M N a a MOKN
Key Operation
MDN or MCN Adjust the receiver or speaker
volume (during playback)
1 or MFN Repeat message
(during playback)
*1
2 or MEN Skip message
(during playback)
3 Enter the “Settings” menu
4 Play new messages
5 Play all messages
6 Play greeting message
76 Record greeting message
8 Turn answering system on
M N
Pause message
*2
9 or MnN Stop recording
Stop playback
0 Turn answering system off
*4
*3
Erase currently playing
message
*5 Erase all messages
*6 Reset to a pre-recorded
greeting message
Helpline Tel. No.: U.K. 0344 844 3899 Ireland 01289 8333
33
Answering System
To Next Page
Loading...
